Optional conical & basket strainers can supplied standard in galvanized, 304 & 316 stainless steel construction
Very large hydraulic offering with high heads per stage minimizing bowl lengths
Investment cast, 304 stainless steel impellers in semi-open & enclosed designs
416 stainless steel bowl shaft supplied standard
Dual bearing discharge case that can be set up for oil or forced water flush lubrication
Threaded, heavy wall column assemblies in sizes 4″ to 48″ diameter
Heavy duty threaded or fabricated steel discharge heads available in discharge sizes from 4″ to 48″ diameter
Tension tube assembly can be set up for oil or forced water flush lubrication
Vertical holloshaft (VHS), vertical solid, shaft (VSS) or right angle gear drive (RAG) (when Diesel engine driven) driver construction
Series 4810
Enclosed Lineshaft Vertical Turbine Pumps
FEATURES & BENEFITS
The Series 4810 VT Vertical Turbine product line is a heavy duty vertical turbine designed for the commercial, industrial & municipal markets. The VT Vertical Turbine can be supplied in a single or multistage orientation with a wide variety of overall length options. Pumps can be supplied in an overall length specified by the client. Optional material, packing or mechanical seal & thrust pot options are available upon request.
Performance:
Flows: To 28,000 GPM [6,359 M3/HR]
Heads: To 980 FEET [300 M]
Speeds: 3550 RPM, 2950 RPM, 1760 RPM, 1480 RPM, 1180 RPM, 980 RPM, 740 RPM, 725 RPM, 590 RPM, 490 RPM, 380 RPM
Sizes: 5AMC -> 42AMC Bowls
The 4810 Series VT Vertical Turbine product line has the following specifiable features and benefits:
- Optional basket strainers in a variety of optional metallurgy
- Class 30 cast iron bowls with vitreous porcelain glass lining
- Flanged bowl construction for easy assembly and disassembly
- Investment cast, 304 stainless steel impellers
- 416 stainless steel shafting
- 304 stainless steel bolting
- Heavy duty bronze bowl bearings between each stage and under each bearing
- Threaded column assemblies (4″ through 12″) with 420 stainless steel line shaft with flanged construction as an option (4″ through 48″)
- Open or enclosed lineshaft construction available
- Cast iron discharge heads (4″ through 16″)
- Optional fabricated steel discharge heads (4″ through 48″) with heavy duty double bearing stuffing box assembly
- Ductile iron deepset heads (8″ through 12″)
- Stuffing box features 304 stainless steel shaft sleeves, 304 stainless steel gland & 304 stainless steel lantern ring
- Options for a wide variety of component & cartridge mechanical seals
- Full optional metallurgy support for sea water applications (all bronze, all 316SS, all 2205 & 2507 super duplex stainless steel)
