FEATURES & BENEFITS

The Series 5010 ES End Suction product line is a third party certified, fire protection pump in a flex-coupled orientation with a centerline discharge.  This product can be electrically or Diesel engine driven and is a perfect fit for the smaller flow applications found throughout the industry.

Certified Performance:

Flows:  50 GPM to 2,000 GPM [11 M³/HR to 455 M³/HR]
Heads:  40 PSI to 220 PSI [2.75 BAR to 15.2 BAR]
Speeds:  3550 RPM, 2950 RPM

The 5010 Series ES End Suction product line has the following specifiable features and benefits:

• Ductile iron casing and rear cover with 250 PSI pressure ratings
• Cast integral casing foot that provides casing support when the back pull out assembly is removed
• Centerline discharge minimizes residual piping strain and is self venting
• Cast integral vortex suppressor located at suction inlet designed to minimize pre-rotation of fluid prior to entering the impeller eye
• 250# RF suction & 250# RF discharge flanges
• Investment cast, 304 stainless steel impellers
• 4340 quenched and tempered high chrome steel shafting
• 304 stainless steel shaft sleeve, 304 stainless steel gland and 304 stainless steel lantern ring
• 304 stainless steel flush lines with 304 stainless steel ball valves
• 7300 series angular contact bearing at the inboard and outboard locations
• Modular power frame assembly minimizes number of parts needed
• Milled and drilled pad locations under pump and driver
• Alignment jackscrews located under the motor (Electric) or pump (Diesel) to aid in field alignment
• Base leveling jackscrews to allow for a quick and efficient leveling of the base to the concrete pad in the field
• Two grounding lugs located on the base to safely ground the entire assembly
• Integral lifting lugs on the base to safely lift and transport the entire base assembly