1
2
3
4
5
6
7
8
9
10
11
1

304 stainless steel flush tubing and ball valves

2

Bronze case wear rings

3

Removable and replaceable stuffing boxes and/or seal chambers

4

420 stainless steel shaft and shaft sleeves with outer diameter o-ring

5

Packing with lantern ring supplied standard

6

Oil lip seals keep contaminants out of each bearing housing

7

Optional component or cartridge mechanical seals

8

Investment cast, 304 stainless steel, double suction impeller

9

Bolt on bearing housings with register fit

10

Casing assemblies have prybar locations at each quadrant with integral jackscrews

11

Heavy wall A48 class 30 cast iron casing assembly

Series 3610 HS & HC

Split Case Pumps

FEATURES & BENEFITS

The Series 3610 HS Split Case product line is a complete split case offering with a very diverse flow and pressure envelop.  This product can be electrically or Diesel engine driven and is a perfect fit for commercial, industrial and municipal applications.

Performance:

Flows:  To 90,000 GPM [20,441 M3/HR]
Heads:  To 700 FEET [214 M]
Speeds:  3550 RPM, 2950 RPM, 1760 RPM, 1480 RPM, 1180 RPM, 980 RPM, 740 RPM, 725 RPM, 590 RPM

The 3610 Series HS Split Case product line has the following specifiable features and benefits:

  • Class 30 cast iron casing with 250 PSI pressure ratings
  • Double volute casing designed to reduce radial loads
  • 125# or 250# suction & discharge flanges (optional RF flanges)
  • High efficiency impeller design that lead the industry on lower horsepower
  • Investment cast, 304 stainless steel impeller
  • 420 stainless steel shafting
  • 304 stainless steel shaft sleeves, 304 stainless steel glands and 304 stainless steel lantern rings
  • 304 stainless steel flush lines with 304 stainless steel ball valves
  • 6300 series deep groove bearing at the inboard and outboard locations
  • Modular rotating assembly groups minimizes number of parts needed
  • Inboard & outboard bearing housings are removable and replaceable without removing the casing top
  • Casing top has pry bar locations and jackscrews to aid in pump disassembly
LiteratureHS Parts InformationHC Parts Information

  • 3x5-8 HS

  • 3x5-10 HS

  • 3x5-13 HS

  • 4x5-10 HS

  • 4x5-13 HS

  • 4x5-16 HS

  • 4x5-16G HS

  • 5x8-10 HS

  • 5x8-12 HS

  • 5x8-14 HS

  • 5x8-20 HS

  • 6x8-11 HS

  • 6x8-15 HS

  • 6x8-18 HS

  • 6x8-23 HS

  • 8x10-13 HS

  • 8x10-16 HS

  • 8x10-20 HS

  • 8x10-26 HS

  • 10x12-12 HS

  • 10x12-13 HS

  • 10x12-16 HS

  • 10x12-20 HS

  • 10x12-24 HS

  • 10x12-30 HS

  • 12x14-12 HS

  • 12x14-14 HS

  • 12x14-16 HS

  • 12x16-18L HS

  • 12x16-18H HS

  • 12x16-22 HS

  • 12x16-28 HS

  • 14x16-14 HS

  • 14x16-16 HS

  • 14x16-22 HS

  • 16x16-14 HS

  • 12x20-30 HS

  • 12x20-36 HS

  • 16x20-16 HS

  • 16x20-17 HS

  • 16x20-20 HS

  • 16x20-22 HS

  • 16x20-23 HS

  • 16x20-26 HS

  • 16x20-27 HS

  • 16x24-30 HS

  • 16x24-34 HS

  • 20x24-18 HS

  • 20x24-20 HS

  • 20x24-22 HS

  • 20x28-26 HS

  • 20x28-37 HS

  • 24x28-24 HS

  • 24x28-28 HS

  • 24x28-30 HS

  • 28x28-20 HS

  • 28x32-30 HS

  • 28x32-38L HS

  • 28x32-38H HS

  • 32x40-37 HS

9050 – Diesel Engines4810 VT – Open Lineshaft Vertical Turbine Pumps