Ameriflo VI Vertical Inline Pumps

/in , /by

5020 Series Vertical Inline

Ameriflo is excited to announce the final stages of their newest product offering, the 5020 VI Vertical Inline product line.  This product line will be the most advanced and hydraulically efficient Vertical Inline product available for the Fire Protection industry.  The Ameriflo distributor network has asked about the product line for the last three months and today we will take a sneak peak of what is to come.

The VI product was built from the ground up with the fire protection market in mind.  Every aspect of its design from the actual hydraulic coverage to the materials of construction were built based on the very stringent NFPA 20 standard.  This standard describes slope of curve requirements, suction characteristics, hydrostatic pressure requirements as well as bearing and shaft strength requirements.  The product line was designed with minimum horsepower as the primary focus and as such, the Ameriflo VI product line has the lowest documented horsepowers available in the fire protection market today!!

Performance Characteristics

  • Sizes:  2×2-8 to 6×6-13
  • Flows:  50 to 1,500 GPM
  • Pressures:  40 to 198 PSI
  • Frequencies:  50 & 60 Cycle
  • Speeds:  3550, 2950,1760 & 1450 RPM

The 5020 VI product line is coupled to a NEMA C-Face, JP Frame motor.  This allows for a very compact footprint as well as a diverse horsepower coverage.  Ameriflo VI Vertical Inline products are available from a very small 10 HP all the way up to 250 HP.  This allows for one of the most diverse hydraulic coverages available from any vertical inline Fire Pump manufacturer.

Read more

Ameriflo Leveraging Technology

/in , , , , , , , /by

Ameriflo Leveraging Technology

Ameriflo is THE market leader in leveraging technology to design, develop and manufacture the highest quality product line available in the Fire Protection industry period. With the largest North American third party certified hydraulic offering trust your life safety applications to the new kid on the block!! There simply is no other pump manufacturer that offers the hydraulic envelope and options for product, metallurgy and integrated package solutions anywhere in the world.

We design all product in house utilizing state-of-the-art solids modeling and computational fluid dynamics software. We are one of the last pump manufacturers to still have a fully staffed engineering group in house that actually understands the product that we manufacture and are dedicated to full customer support before, during and after the sale. This technical background theme continues to the top with the President & CEO!!

The amount of interest in the product line has been truly amazing and we are very happy to have so many new accounts join the Ameriflo family. Please continue to contact us to start your next move and drive your company into a new and successful direction.

Ameriflo…..The Future Of Fire Protection

 

5040 Vertical Turbine Pumps

/in , /by

5040 Series VT Vertical Turbine

A product line that nearly every pump manufacturer struggles with is, without a doubt, the dreaded vertical turbine.  This is a complex pump with a variable number of stages and the option of selecting nearly any overall length dimension.  It is for this reason that many manufacturers stay away from this product type all together or those that decide to offer it, do a horrible job at manufacturing and supplying it.  Here at Ameriflo, we excel at this very challenging product line and offer the largest third party certified hydraulic coverage in the fire protection industry.

Performance Characteristics

  • Sizes:  10 Inch to 22 Inch Bowls
  • Flows:  100 to 8,000 GPM
  • Pressures:  40 to 377 PSI
  • Frequencies:  50 & 60 Cycle
  • Speeds:  2950, 1760 & 1450 RPM

Vertical turbine pumps are perfectly suited for applications where a pool of water is the fluid source.  This source can be fresh, brackish or sea water.  Ameriflo can manufacture vertical turbine pumps out of standard materials but also offers a complete family of optional metallurgy for these demanding applications.

Read more

SC GEN-PAC

GEN-PAC Booster Systems

/in , , , , , , , /by
GEN-PAC Booster System

VT GEN-PAC Booster System

GEN-PAC Booster Systems

One of the most diverse products in the Ameriflo product line is the ability to integrate any standard fire pump (pump on a base with coupling, coupling guard and driver) into a fully integrated system.  This Genesys Booster System (GEN-PAC) offers the client a fully integrated solution that makes the installation very easy.

GEN-PAC Booster Systems are available in a variety of configurations including one electric (1E), one diesel (1D), one electric + one diesel (1E+1D), two electric (2E) or two diesel (2D) configurations.  Systems can be supplied in end suction (ES), vertical inline (VI), split case (SC) and vertical turbine (VT) product types.  While Ameriflo has expanded their offering to include this very popular option, other fire pump manufacturers have backed out of the booster system market completely.  Many current Ameriflo distributors/representatives have joined the Ameriflo group because the GEN-PAC option is needed so that they can compete in their respective markets.  This additional product line gives the Ameriflo distributor/representative a complete fire protection solution and a single source of responsibility.

Read more

Investment Cast Impellers

/in , , , , /by

Investment Cast Impellers

One of the biggest differences between the Ameriflo product line and all others is the excrutiating attention to detail that they make as a primary focus.  The heart of the pump, the impellers, determine overall performance and slope of the performance curve.  Ameriflo is the ONLY pump manufacturer that standardizes on investment cast impellers for standard construction in all manufactured fire protection product lines.  These impellers have very smooth fluid passageways which have a direct effect of increased  efficiency which can be seen on all published performance curves.

Ameriflo uses very complex Computational Fluid Dynamics (CFD) software to engineer the maximum efficiency and hydraulic performance from every impeller that they manufacture.  Solid Works software allows for the most efficient designing process currently available today.  End suction (ES), vertical inline (VI), split case (SC) and vertical turbine (VT) product lines use these impellers as standard construction.  The advantages of this engineering design and casting process are visible when you look at the performance curves offered by Ameriflo.  Ameriflo leverages technology not available in the past to design and develop the most advanced product lines available in the market today.

Read more

Ameriflo SC Split Case Pumps

/in , /by

5030 Series SC Single Stage Split Case

Ameriflo has many different product lines that cover many different markets.  Perhaps the most popular product offered today by Ameriflo is the split case product line.  Ameriflo has the largest, third party certified hydraulic coverage as compared to any other current North American manufacturer.  The 5030 Series SC product line is available in a single stage and a two stage design.  Todays blog will focus on the single stage design and a future blog will focus on the two-stage.

The SC product was built from the ground up with the fire protection market in mind.  Every aspect of its design from the actual hydraulic coverage to the materials of construction were built based on the very stringent NFPA 20 standard.  This standard describes slope of curve requirements, suction characteristics, hydrostatic pressure requirements as well as bearing and shaft strength requirements.  The product line was designed with minimum horsepower as the primary focus and as such, the Ameriflo SC product line has the lowest documented horsepowers available in the fire protection market today!!

Performance Characteristics

  • Sizes:  3×5-8 to 12×16-30
  • Flows:  300 to 8,000 GPM
  • Pressures:  40 to 367 PSI
  • Frequencies:  50 & 60 Cycle
  • Speeds:  3550, 2950, 2600, 2350, 2100, 2000, 1760 & 1450 RPM

The 5030 Series SC product line has third party flow rates starting at 300 GPM and stopping at an incredible 8,000 GPM, much, much larger than nearly all other NFPA 20 centrifugal pump manufacturers.  This extended range allows Ameriflo to offer a single fire pump in an application where other manufacturers must offer two or more units.  This gives the client an incredible amount of flexibility when it comes to installation cost and footprint required.

All models feature investment cast, 304 stainless steel impellers and heavy wall, ribbed ductile iron casings.  All shafts and shaft sleeves are offered standard in 420 stainless steel and feature unique and specifiable purge grease bearing lubrication.  All inboard and outboard bearing housings are completely removable and replaceable without the need to remove the upper casing assembly.  This allows for bearing inspection/replacement to be completed in a fraction of the time as compared to other manufacturers.  Casing halves feature quadrant pry-bar locations with jack screws for easy casing disassembly when the need for service arises.  Both stuffing box drip basins are also plumbed to a common point making the collection of packing leakage very clean at the job-site.  Ameriflo is also one of the only manufacturers that mounts the pump data plate at a location where it is easily viewable, at the center of the upper casing assembly (where it should be).

All pumps have suction and discharge gauges installed with 304 stainless steel buffer tubing (for stable pressure readings) as well as 304 stainless steel ball valves.  All internal flush tubing and all ball valves present on the upper casing are also constructed out of 304 stainless steel.  Lastly, each stuffing box is protected by a power coated, metal safety guard keeping safety a paramount priority.

Read more

Ameriflo Corporation Introduction

/in /by

AMERIFLO Introduction

Today marks the start of a new chapter in the global Fire Protection industry.  Ameriflo is a global centrifugal pump manufacturer primarily focused on the fire protection markets.  With one of the largest hydraulic, third party certified offerings anywhere on the planet, rest assured Ameriflo has the pump you need for this very critical industry.  Products offered include end suction (ES), vertical inline (VI), single stage split case (SC), two-stage split case (SC(2)) and vertical turbine (VT).  These products cover the most diverse hydraulic offering of any North American fire pump manufacturer and include some of the lowest documented horsepowers the industry has ever seen.

Pumps on a base with coupling and driver (electric motor or Diesel engine) are offered with options that include fully skidded GENESYS PACKAGED (GEN-PAC) booster systems with or without an enclosure (GEN-PAC Container) round out the product offering.  Jockey pumps are available in a vertical multistage or submersible turbine product type based on job-site requirements.  Ameriflo is also one of a select few manufacturers that offers optional metallurgy (bronzes & super duplex stainless steels) for fire protection applications where sea water is the pumped medium.

End Suction (ES) – Flows from 50 GPM through 1,500 GPM & pressures from 40 PSI through 185 PSI

Vertical Inline (VI) – Flows from 50 GPM through 1,500 GPM & pressures from 40 PSI through 185 PSI

Split Case (SC) – Flows from 300 GPM through 8,000 GPM & pressures from 40 PSI through 610 PSI

Vertical Turbine (VT) – Flows from 100 GPM through 6,000 GPM & pressures from 40 through 377 PSI

Read more